Evaluate: MAX1162/MAX1062
MAX1162 Evaluation System/Evaluation Kit
2 _______________________________________________________________________________________
Quick Start
Recommended Equipment—USB Port PC
Connection Option
Before you begin, the following equipment is needed:
• MAX1162EVC16 (MAX1162EVKIT board,
68HC16MODULE-DIP, and USBTO232)
• Three DC power supplies: 8V to 20V, 5V, and -5V
• External reference: +4.096V
• Analog signal source: 0 to +4.096V
• A PC running Windows 2000/XP with an available
standard USB port to connect to the USBTO232
• USB cable included with the USBTO232
Procedure
Caution: Do not turn on the power until all the con-
nections are completed.
1) Visit the Maxim website (www.maxim-ic.com) to
download the latest version of the USBTO232 User
Guide. Follow the steps in the USBTO232 User
Guide Quick Start section and return to step 2 of
this Quick Start section when finished.
2) Carefully connect the boards by aligning the 40-pin
connector of the MAX1162 EV kit with the 40-pin
header of the 68HC16MODULE-DIP module. Gently
press them together. The two boards should be
flush against one another.
3) Ensure that the 68HC16MODULE-DIP module’s
SW1 switch is in the OFF position.
4) Connect the 8V to 20V power supply to the
68HC16MODULE-DIP module’s terminal block (J2)
located next to SW1. Observe the polarity marked
on the board.
5) Connect the 5V power supply to the VDD pad (with
respect to the GND pad) on the MAX1162 EV kit
board.
6) Connect the -5V power supply to the VEE pad (with
respect to the GND pad) on the MAX1162 EV kit
board.
7) Apply a 4.096V reference voltage to the MAX1162
EV kit’s terminal block (TB0) located in the upper-
left corner of the MAX1162 EV kit board. Observe
the polarity marked on the board.
8) Connect the USBTO232 board to the 68HC16MOD-
ULE-DIP module if you have not done so already.
9) The MAX1162 EV kit software should have already
been downloaded and installed in the USBTO232
Quick Start.
10) Start the MAX1162 program by opening its icon in
the Start | Programs
menu.
11) Turn on all power supplies and enable the refer-
ence voltage. Slide SW1 to the ON position on the
68HC16MODULE-DIP module. Press the OK button
to automatically connect and download the
KIT1162.C16 file to the module.
12) Apply an input signal (0V to VREF) between AIN
and GND. Observe the readout on the running
Windows program.
Recommended Equipment—RS-232/COM
Port PC Connection Option
Before you begin, the following equipment is needed:
• MAX1162EVC16 (MAX1162EVKIT board and
68HC16MODULE-DIP)
• Three DC power supplies: 8V to 20V, 5V, and -5V
• External reference: +4.096V
• Analog signal source: 0 to +4.096V
• A PC running Windows 98/2000/XP with an avail-
able standard serial port, preferably a 9-pin plug
• A standard serial cable to connect the PC’s standard
serial port to the 68HC16MODULE-DIP module
Procedure
Caution: Do not turn on the power until all the con-
nections are completed.
1) Visit the Maxim website (www.maxim-ic.com/evkit-
software) to download the latest version of the EV kit
software. Save the EV kit software to a temporary
folder and uncompress the file (if it is a .zip file).
Component Suppliers
(27 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels